进口气动耐磨摆动阀 进料阀 出料阀 美国RETZ瑞茨

　　品牌：retz/我们一直致力于流体控制和测控领域的持续创新，始于2005……

　　(进料阀，出料阀)进口气动耐磨摆动阀采用双阀板密封，密封面采用硬质合金摩擦副或增韧陶瓷摩擦副结构，耐磨性强，密封性好，启动负荷小，阀腔无积灰、无卡塞现象theimported pneumatic wear-resistant swing valve adopts a double valve plate seal,and the sealing surface adopts a hard alloy friction pair or toughened ceramicfriction pair structure. it has strong wear resistance, good sealingperformance, low starting load, and no dust accumulation or jamming in thevalve chamber

　　进口气动耐磨摆动阀性能参数performance deion

　　采用摆动结构设计，启动负荷小 swingstructure design is adopted, with small starting load

　　阀体超大空间设计，不易堵塞，提升物料输送效率 thevalve body is designed with large space, which is not easy to block, andimproves the efficiency of material delivery

　　密封填料采用耐磨耐高温氟橡胶密封组件，耐温高达450度 the sealingfiller is made of wear-resistant and high temperature resistant fluororubbersealing components, and the temperature resistance is up to 450 degrees

　　密封面采用耐磨硬质合金材料或耐磨增韧结构陶瓷，硬度可达60~70hrcthe sealing surface is made of wear-resistant cemented carbide orwear-resistant toughened structural ceramics, with hardness up to 60~70hrc

　　密封面采用全陶瓷或全合金覆盖，耐磨面积提高200-300%，使用寿命提高3-5倍 retz品牌 the sealingsurface is covered with all ceramics or all alloys, the wear resistance area isincreased by 200-300%, and the service life is increased by 3-5 times

　　进口气动耐磨摆动阀技术参数technicalparameters

　　公称压力（nominalpressure）∶1.0mpa

　　密封试验（leakagetest pressure）∶1.1mpa

　　介质温度（temperature）∶≤200℃，≤450℃

　　强度试验（maximumtest pressure）∶1.5mpa

　　dn40-dn300全系列进料阀、出料阀和平衡阀覆盖dn40-dn300 full series feed valve, discharge valve and balance valve cover