进口卡箍式气动角座阀 不锈钢快装式角座阀 美国RETZ瑞茨

　　品牌：RETZ瑞茨/我们一直致力于流体控制和测控领域的持续创新，始于2005……

　　一劳永逸，事实证明RETZ角座阀工作寿命超过一百万次 Once and forall, it has been proven that the RETZ angle seat valve has a service life ofover one million times

　　气动角座阀用于短时间频繁启动,反应灵敏，大流量，无噪声、无水锤,保持高流速,能够节省空间,它采用气动执行机构来操作的导向角座阀来实现开关 Thepneumatic angle seat valve is used for frequent start-up in a short time, withsensitive response, high flow rate, no noise, no water hammer, maintaining highflow rate, and can save space. It uses a guided angle seat valve operated by apneumatic actuator to achieve opening and closing

　　进口卡箍式气动角座阀工作原理Working principle

　　在非工作的状态时，由于弹簧力作用，阀门常闭（开）

　　当执行器活塞呗压缩气体作用时，阀门打开（关闭）

　　进口卡箍式气动角座阀特点Characteristicsof pneumatic flange angle seat valve

　　自动调节双层填料密封盖Self-adjusting,doublepacking glands.

　　加长防锤形导向和防尘密封圈Extendedspindle guideand wiper seal.

　　易安装，汽控接口可在360°上任意选定位置Easy to installMotor control interface on the 360°Random designation position

　　无水击作用(流向阀座下)Waterhammer-free(Flow below seat)

　　比截止阀高50%的流速 50% higher flowratesthan the Global valves

　　配有长寿活塞环的免修执行器Maintenance-free actuatorWith long-life piston ring

　　开启时无振动，比普通阀减少40%的用气量 Shock freeopening With 40% less alr consumption

　　进口卡箍式气动角座阀参数

　　阀体材质：304/316

　　气缸材质：PAC（聚酰胺）、304

　　阀芯密封：PTFE、FKM

　　阀门的工作压力应位于0~16/25Bar ，（蒸汽介质在 180℃C时，工作压力为0~10 Bar)

　　介质温度∶ -10℃~180℃

　　介质粘度∶≤600cst（mm2/s）

　　典型应用--

　　食品和饮料流水线 Foodand beverage

　　可控介质比如：空气，水，高达180℃蒸汽，碱性溶液和真空Processingindustries control of mediumssuch as air, water, steam up to 180℃, lye,vacuum

　　纺织印染和漂白Textile dyeing and bleaching

　　可控水，高达180℃的蒸汽，苏打液 Control ofwater, steam up to 180℃Corium hypochlorite

　　医院和制药工业消毒高压灭菌器Sterilizersand auto-claves for hospitals and the pharmaceutical industry

　　可控蒸汽高达180℃的水 Control ofsteam,hot water up to 180℃

　　洗衣Laundries

　　可控水，蒸汽，洗涤剂Control of water, steam, washing agents

　　工业洗涤设备和溶解设备Control of solvents, steam, vacuum

　　可控溶剂，蒸汽和真空Industrial washing equipmentand solvent recovery systems

　　机械制造Machine tools

　　可控冷却液 Control of coolant agents