进口隔膜式浮球阀 膜片式 活塞式水力浮球阀 液面补水浮球阀 美国RETZ瑞茨

　　品牌：RETZ瑞茨/美国，我们一直致力于流体控制领域的持续创新，始于2005……

　　性能：用于控制水箱或水池液面

　　Performance: Usedto control the liquid level of water tanks or pools

　　产品详情 Product details

　　隔膜式yao控浮球阀主阀安装在水箱外，浮球导阀安装在水箱内。当液位降低时，浮球导阀打开，上控制室失压，则主阀打开，向水箱内gongshui。当液位上升使浮球导阀关闭时，上控制室压力增加，则主阀关闭，停止向水箱内gongshui水。

　　The main valve ofthe diaphragm type remote control floating ball valve is installed outside thewater tank, and the floating ball guide valve is installed inside the watertank. When the liquid level drops, the float valve opens, and if the uppercontrol room loses pressure, the main valve opens to supply water to the watertank. When the liquid level rises and the float valve closes, the pressure inthe upper control room increases, and the main valve closes, stopping thesupply of water to the water tank.

　　进口隔膜式yao控浮球阀结构特点 Structural characteristics

　　1、关闭严密可靠。采用衬胶阀瓣密封，利用液压控制原理，使阀瓣关闭力成正比，密封可靠性高 Close tightly and reliably. Adopting rubber linedvalve disc sealing, utilizing hydraulic control principle to make the valvedisc closing force proportional, with high sealing reliability

　　2、过流量大。采用半直线型流道宽阀体和等过流量面积设计，阀门阻力小 Excessive flow. Adopting a semi linear flow channelwith wide valve body and equal flow area design, the valve has low resistance

　　3、运行安全，关闭速度可调，阀门动作平稳，启闭不产生压力波动，无管振和噪音 Safe operation, adjustable closing speed, stable valveaction, no pressure fluctuations during opening and closing, no pipe vibrationor noise

　　4、使用维护方便。主阀体可安装在水池外面，调试检查方便，维护简单 Easy to use and maintain. The main valve body can beinstalled outside the water tank, making debugging and inspection convenientand maintenance simple

　　进口隔膜式yao控浮球阀技术规范 Technical specifications

　　公称通径：DN50~DN500

　　适用温度：0℃~100℃

　　工作压力：1.0Mpa,1.6Mpa,2.5Mpa

　　动作压力：≤0.05Mpa

　　隔膜式：DN50～DN350

　　活塞式：DN50～DN600

　　阀体材质：球墨铸铁、碳钢

　　膜片材质：丁腈橡胶

　　适用介质：原水，清水，油及性质接近水的液体