进口隔膜式不锈钢安全阀 不锈钢背压阀 美国RETZ瑞茨

　　品牌：RETZ瑞茨/我们一直致力于流体控制领域的持续创新，始于2005……

　　进口隔膜式不锈钢安全阀、不锈钢背压阀在现场可通过调节螺丝借助管路中的压力表在0-1.0Mpa范围内设置压力，泄放压力一般设置高于系统压力0.1-0.2Mpa，安全阀调压不允许超过泵的zui大压力，安装一般尽量靠近泵的出口处，泵与安全阀之间不应有任何阀门，保护泵的安全和系统的正常运行Importedstainless steel safety valves and stainless steel back pressure valves can beset within the range of 0-1.0Mpa on site by adjusting screws with the help of apressure gauge in the pipeline. The relief pressure is generally set to be0.1-0.2Mpa higher than the system pressure. The pressure adjustment of thesafety valve should not exceed the maximum pressure of the pump, andinstallation should generally be as close as possible to the pump outlet. Thereshould be no valves between the pump and the safety valve to protect the safetyof the pump and the normal operation of the system

　　规格Specification:0~1.0MPa、0.2~1.6MPa

　　适用温度Temperature：≤80℃

　　设定背压范围Setback pressure range：0~1.0MPa、0.2~1.6MPa

　　材质Materia：SUS304、SUS316LF

　　连接方式：丝扣、法兰 screwthreads, flanges

　　隔膜材质：PTFE+橡胶复合 Diaphragmmaterial: PTFE+rubber composite

　　进口隔膜式不锈钢安全阀、不锈钢背压阀性能特点Performance characteristics

　　释放管路压力，保证系统压力稳定Release pipeline pressure to ensure stable system pressure

　　保护泵的安全和系统的正常运行Protect the safety of the pump and the normal operation of the system

　　与脉冲阻尼器配合使用减小水锤对系统的危害，达到优越的低振动调节效果Combined with pulse dampers to reduce the harm of water hammer to the systemand achieve superior low vibration regulation effect

　　减小流速波动的峰值，保护管路系统不受压力波动的冲击Reduce the peak value of flow rate fluctuations and protect the pipeline systemfrom pressure fluctuations

　　隔膜采用先进的PTFE+橡胶复合工艺，几乎适用于所有腐蚀性流体，密封可靠无泄漏 Thediaphragm adopts advanced PTFE+rubber composite technology, which is almostsuitable for all corrosive fluids, with reliable sealing and no leakage