进口高粘度电磁阀 沥青专用电磁阀 美国RETZ瑞茨

　　品牌：RETZ瑞茨/我们一直致力于流体控制领域的持续创新，始于2005……进口高粘度电磁阀流体粘度通常在50cst 以下可以任意选择，若超过此值，则需要选择高粘度电磁阀 RetzThe fluid viscosity is usually below 50cst and can be arbitrarily selected. Ifit exceeds this value, a high viscosity solenoid valve needs to be selected

　　进口高粘度电磁阀工作原理-Workingprinciple of imported high viscosity solenoid valve

　　常闭式：Normallyclosed

　　当线圈通电时，先导阀芯吸合，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开。当线圈断电时，先导阀芯靠弹簧复位，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。

　　Whenthe coil is energized, the pilot valve core is closed, the pilot hole opens,the upper chamber of the valve is depressurized, the piston is pushed by themedium pressure in the lower chamber, and the solenoid valve opens. When thecoil is powered off, the pilot valve core is reset by the spring, the pilothole is closed, and the valve upper chamber is pressurized by the pistonorifice and the thrust of the reset spring, and the solenoid valve is closed.

　　常开式：Normallyopen

　　当线圈通电时，先导阀芯靠弹簧复位，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。当线圈断电时，先导阀芯靠弹簧复位，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开。

　　Whenthe coil is energized, the pilot valve core is reset by the spring, the pilothole is closed, and the valve upper chamber is pressurized by the pistonorifice and the thrust of the reset spring, and the solenoid valve is closed.When the coil is powered off, the pilot valve core is reset by the spring, thepilot hole is opened, the upper chamber of the valve is depressurized, thepiston is pushed by the medium pressure in the lower chamber, and the solenoidvalve opens.

　　注：出口端压力大于进口端压力，介质会反向导通。可安装止回阀 Note:If the outlet pressure is greater than the inlet pressure, the medium willconduct in the opposite direction. Can be installed with a check valve

　　进口高粘度电磁阀选型参数--

　　产品规格：1/2-4"

　　阀体材质：不锈钢 、铸钢

　　介质温度： -40℃~+200 ℃

　　适用压力：0~1.6MPa

　　防护性能：防水、防爆（DⅡCT5、ExdⅡCT5、ExmbⅡCT4、ExdⅡCT4）、防腐。

　　防护等级：IP67、IP65

　　阀芯材质: 均为不锈钢

　　接线方式：接线座式、引线式、插头式

　　控制方式：常开、常闭

　　电源电压：DC24~127V；AC36~380V

　　连接方式：内螺纹、法兰

　　适用介质：液体、油品、沥青高粘度流体等，小于50CSt （大于50时需定制）

　　泄 漏 量：零