进口高温电磁阀 超高温电磁阀 美国RETZ瑞茨

　　品牌：RETZ瑞茨/我们一直致力于流体控制领域的持续创新，始于2005……进口高温电磁阀为先导活塞式结构,采用杠杆散热功能，原理保证线圈和阀体彻底隔离，提高了使用温度，广泛应用于吹瓶机械、空压机、加湿设备、高温高压场合、中高温热水、中高温导热油、高温蒸汽、过热蒸汽等、电站抽气管道疏水系统和蒸发器的排气需要高温控制的系统中TheRETZ high-temperature electromagnetic valve is a pilot piston type structurethat uses a lever heat dissipation function to ensure complete isolationbetween the coil and valve body, increasing the operating temperature. It iswidely used in bottle blowing machinery, air compressors, humidificationequipment, high-temperature and high-pressure occasions, medium to hightemperature hot water, medium to high temperature heat transfer oil,high-temperature steam, superheated steam, etc., as well as in systems thatrequire high-temperature control for the drainage system of power stationextraction pipelines and the exhaust of evaporators

　　进口高温电磁阀工作原理--Workingprinciple of imported high-temperature solenoid valve

　　常闭式：当线圈通电时，先导阀芯吸合，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开。 当线圈断电时，先导阀芯靠弹簧复位，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。

　　Normallyclosed: When the coil is energized, the pilot valve core is closed, the pilothole opens, the upper chamber of the valve is depressurized, the piston ispushed by the medium pressure in the lower chamber, and the solenoid valveopens. When the coil is powered off, the pilot valve core is reset by thespring, the pilot hole is closed, and the valve upper chamber is pressurized bythe piston orifice and the thrust of the reset spring, and the solenoid valveis closed.

　　常开式：当线圈通电时，先导阀芯靠弹簧复位，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。 当线圈断电时，先导阀芯靠弹簧复位，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开。

　　注：出口端压力大于进口端压力，介质会反向导通。可安装止回阀

　　Normallyopen: When the coil is energized, the pilot valve core is reset by the spring,the pilot hole is closed, and the upper chamber of the valve is pressurized bythe piston orifice and the thrust of the reset spring, and the solenoid valveis closed. When the coil is powered off, the pilot valve core is reset by thespring, the pilot hole is opened, the upper chamber of the valve isdepressurized, the piston is pushed by the medium pressure in the lowerchamber, and the solenoid valve opens. Note: If the outlet pressure is greaterthan the inlet pressure, the medium will conduct in the opposite direction. Canbe installed with a check valve

　　进口高温电磁阀特点-- 活塞结构性能稳定；

　　密封采用耐高温材料，线圈外围增设散热机构;

　　阀塞与阀间巧妙地利用流体润滑作用，减少磨损;

　　阀芯均为不锈钢活塞式, 活塞环不会被介质中的杂质卡死;

　　进口高温电磁阀选型参数--

　　产品规格：1/4-4"

　　阀体材质：不锈钢/2025

　　介质温度：+300~+600℃~+800℃

　　适用压力：0-100MPa

　　介质温度：-200~+450℃。

　　环境温度：－20～＋50℃

　　防护性能：防水、防爆（DⅡCT5、ExdⅡCT5、ExmbⅡCT4、ExdⅡCT4）、防腐。

　　防护等级：IP67、IP65

　　阀芯材质: 均为不锈钢

　　接线方式：接线座式、引线式、插头式

　　控制方式：常开、常闭

　　电源电压：DC24~127V；AC36~380V

　　连接方式：内螺纹、法兰

　　适用介质：粘度：≤21m㎡/s，（大于21时需定制）气、水、油、蒸汽、燃气、腐蚀性气态或液态流体。

　　泄 漏 量：零