进口防水锤膜片式电磁阀 低功率膜片电磁阀 美国RETZ瑞茨

　　品牌：RETZ瑞茨/我们一直致力于流体控制领域的持续创新，始于2005……

　　特殊结构缓和瞬间压力，防止水锤现象发生，从而保护阀体及管道系统Specialstructure relieves instantaneous pressure and prevents water hammer, therebyprotecting the valve body and pipeline system

　　由先导阀和主阀芯联系形成通道组合而成动作可靠，间接开关，在有压力的情况下正常工作 Thecombination of a channel formed by the connection between the pilot valve andthe main valve core is reliable in action, with an indirect switch thatoperates normally under pressure

　　大通径，多种密封形式可选 Largediameter, multiple sealing forms available

　　先导膜片式，低功率，适合长时间工作 Pilotdiaphragm type, low power, suitable for long-term operation

　　抗动作疲劳性强，线圈不易烧毁Strong resistance to action fatigue, and the coil is not easy to burn out

　　密封性能更好，不会被介质卡死Better sealing performance, not getting stuck by the medium

　　进口防水锤先导膜片式电磁阀工作原理Working principle of imported waterproof hammer pilot diaphragm solenoid valve

　　当线圈断电时，弹簧作用动铁芯（二端装有密封件）封闭主阀口，入口和出口介质不流通，出口和排放口相通 Whenthe coil is powered off, the spring acts on the iron core (with seals installedat both ends) to seal the main valve port, and the inlet and outlet media donot flow, while the outlet and discharge ports are connected

　　当线圈通电时，电磁力及介质压力克服弹簧力使动铁芯（二端装有密封件）向上移动至静铁芯，此时入口和出口相通，排放口关闭 Whenthe coil is energized, the electromagnetic force and medium pressure overcomethe spring force to move the moving iron core (with sealing components at bothends) upwards to the static iron core. At this time, the inlet and outlet areconnected, and the discharge port is closed

　　进口防水锤先导膜片式电磁阀选型参数--

　　接口螺纹：G，NPT,RC1/4～2”

　　工作压力：0.03-1.6MPa

　　适用介质：中性，气态或液态流体

　　介质粘度：≤21mm2/s

　　介质温度：NBR-10～+80℃,FKP-10～+110℃，EPDM-20～+120℃

　　环境温度：-10～+50℃(防爆型-20～+40℃)

　　阀体材质：黃铜,不锈钢304

　　标准电压: AC:220V(50/60Hz)

　　DC:24V

　　防护等级：IP65

　　安装方式: 线圈朝上