进口电动衬氟球阀 耐酸碱 耐腐蚀防爆电动球阀 美国RETZ瑞茨

　　品牌：RETZ瑞茨/我们一直致力于流体控制和测控领域的持续创新，始于2005……

　　进口衬氟球阀(耐酸碱，耐腐蚀)内腔及球体均采用高压注塑工艺，衬有耐腐蚀、耐老化的氟塑料或PTFE，故具有可靠的耐腐蚀性和密封性。能广泛适用于化工、石油、冶金、医药、电力等工业控制系统。对酸、碱等强腐蚀性介质均能很好地应用retz The imported fluorine lined ball valve (acid and alkaliresistant, corrosion resistant) adopts high-pressure injection moldingtechnology for both the inner chamber and the ball, lined withcorrosion-resistant and aging resistant fluoroplastics or PTFE, which hasreliable corrosion resistance and sealing performance. It can be widely used inIndustrial control system such as chemical industry, petroleum, metallurgy,medicine and electric power. It can be well applied to strong corrosive mediasuch as acid and alkali

　　功能介绍 Function introduction

　　进口衬氟球阀(耐酸碱，耐腐蚀)电动衬氟球阀是由电动执行机构和O型衬氟球阀组成。阀体内腔及球芯均采用高压注塑工艺衬有耐腐蚀、耐老化的聚全氟乙炳烯，故具有可靠的耐腐蚀性和密封性。电动衬氟球阀主要用于对生产过程中酸碱等强腐蚀介质的调节或切断。电动执行机构内置伺服系统，无须另配伺服放大器，输入4-20mA信号及220VAC/380V电源即可控制运转 retz Imported fluorine-lined ball valve (acid and alkali resistant,corrosion resistant) electric fluorine-lined ball valve is composed of electricactuator and O-type fluorine-lined ball valve. The inner cavity and ball coreof the valve body are lined with corrosion resistant and aging resistantpolyperfluoroethylene by high-pressure injection molding process, so they havereliable corrosion resistance and sealing. The electric fluorine lined ballvalve is mainly used to regulate or cut off the strong corrosive media such asacid and alkali in the production process. The electric actuator is equippedwith a built-in servo system, which can control the operation by inputting4-20mA signal and 220VAC/380V power supply without additional servo amplifier

　　设计特色 Design features

　　采用软密封阀座，密封性能好 Soft sealing valve seat with good sealingperformance

　　流阻小，流通能力大 Small flow resistance and large flow capacity

　　连接端无外漏结构设计 No leakage structure design at the connectingend

　　适用化学介质，耐腐蚀性能好 Suitable for chemical media, good corrosionresistance

　　结构简单，操作、维修方便 Simple structure, convenient operation andmaintenance

　　进口电动衬氟球阀技术参数及性能 Main technicalparameters and performance

　　公称通径(mm) 0 50 65 80 100 125 00

　　公称压力(MPa) PN1.0、1.6MPa

　　泄漏量 软密封：零泄漏

　　阀体形式 两段式阀体(浮动球体) 两段式阀体(固定球体)

　　阀芯形式 “O”型球形阀芯

　　连接形式 法兰

　　可调范围 DN15-65 DN80-300

　　250:1 350:1

　　基本误差 ±1%

　　死区 ≤1%

　　回差 ≤1%

　　适用温度 密封面

　　PTFE≤180℃

　　配置执行机构 角行程电动执行机构

　　控制方式 开关到位灯(开关两位控制)、智能调节(4～20mA模拟量信号控制)

　　执行器技术参数 Technical parameters ofactuator

　　电源电压 AC220/380V，50/60Hz

　　输出力矩 HR：50N?M～2000N?M；HQ：50N?M～3000N?M

　　动作范围 0～90° 0～360°

　　动作时间 15秒/30秒/60秒

　　保护装置 过热保护

　　环境温度 -30°～60°

　　手动操作 同附件带手柄、手轮

　　限位 电气、机械二重限位

　　防护等级 相当于IP-65

　　防爆等级 ExdII BT4；特殊要求可定制ExdII BT6

　　位置测量 可选装开关或电位计

　　驱动电机 8W/E

　　进线接口 PE1/2〞进线线锁